@Mike5000 If you have a Baofeng handheld look here..it is very easy:
https://destevez.net/2016/07/p…ofeng-uv-5r-10ghz-signal/
it really works.. i do my test here this way..
@Mike5000 If you have a Baofeng handheld look here..it is very easy:
https://destevez.net/2016/07/p…ofeng-uv-5r-10ghz-signal/
it really works.. i do my test here this way..
SV1BDS George I will try to correct this with a lookup table
DB8TF Perfect job Flo...
SV1BDS George I am also building this next week.. just waiting for the module to arrive here..
DL5RDI Johannes.. same result as I had here.. Helix is less than the patch...
HB9RYZ Perfect Wolfgang.. just saw it on Amazon with USB Soundcard... Very fine for using with the Pluto.. Thanks for sharing your experience.. here the link to Amazon:
https://www.amazon.de/Neewer-P…chelle/dp/B076HMFM2M?th=1
Nice long weekend Heiner...
om0aao Villiam there should be no screws inside the path feed. This may cause your result
PY2RN Ed for receiving you need the Software from Marko you find the link here in the forum
Thanks Remco.. The Venton LNBs are at the moment available on Amazon..for people want to rebuild my setup..here the link:
That is how my new setup looks at the end.. receiving works fine now.. but for tranmitting I first have to get a weatherprove box for putting upconverter and PA near to the new antenna.. In the background you see my 60cm dish which I use for tranmitting at the moment..and beside the powersupplies.. and upconverter PA and filter.. this will be moved to the new dish.. and when my andrew PA is ready you can also see me on DATV..
Very suprising I first did a test on the WB bakon with the lens from PE1CKK. the mer was 4,2. then I remembered the the venton lnb was able in this dish to get a mer of 7..
Then I took the original venton lens and put it on the end of POTY. What I can tell you..I am very glad to have now a mer of 7 again.. big surprise..
PA3FYM that was only for the foto session.. now it is corrected... but...
SV1BDS looks very nice. Have a similar solution running here...
HB9SKA Yes Thomas I think that fits..
DL1GNM the simplest way to put a lnb to the poty antenna is using the venton exl-s this is the only venton with pll inside..you can fit it after not more then 5 minutes to the waveguide.. i will post how to do this later over the weekend.
attached a photo how it looks like...
do1ctl denke du weisst, ich mach Elektonikeinkauf hier im QRL seit 20 Jahren und habe ein risiges Netzwerk.. Wenn du mehr wissen wilst.. sick.com ist mein QRL
do1ctl ich werde versuchen die Transistoren als Muster zu bekommen. den Rest denke ich haben wir im QRL sowieso..
dj0abr Kurt I possible I would like to take two board.