F6DZP Perfect Jean-Pierre very good and nice solution..
Posts by DD0KP
-
-
DJ7WL leider nicht.. bin noch dran.. habe dich nicht vergessen..
-
iw5bsf look at this..may be this will fit for you as well..
-
-
thanks..perfect..
-
PA0P nice design..but in the datasheet from Freescale there is no pin description..
-
Here I want to share the information to you from Charles G4GUO how to use the Mini Tiouner Express HW with Jean-Pierres beta release V0.9:
Firstly you need to connect a 10k resistor from pin 29 of the FTDI USB controller chip to ground. Then using FT_Prog (from the FTDI website) you need to change the product descriptor string from Minitiouner-Express to USB <-> NIM Tuner
Then the Minitiouner software will think it is talking to a BATC tuner.
I think he will do the change in his final release.
- CharlesDone this in the evening. It is a bit tricky you need good SMT expierence..or you wait for the implementation of JP to the final V0.9. See this post as a backup if there will be no implementation for Mini Tiouner Express HW to the final version..
-
dj0abr in principle yes..it only depence how low the sat receiver can go with the IF or if it is limeted to 950 MHZ then you need to modify your LNB..
-
dj0abr Kurt there are some OMs on the Relais DB0KO near Cologne using this I am just tyying to get contact with them. The Software for the low SR is only some weeks old.
-
do1ctl same tought like you Frank
-
dj0abr Nice design Kurt.. I recommend to drive all equipment in the outdoor unit out of a 28V powersupply in the shack. In the outdoor unit you can do down conversion to the lower voltages you need. >>And please also keep in mind your SAT RX must handle the low sybol rates. From my point of view there is only one on the market that is the Octagon SF-8008 which could be updated for low SR.
-
do1ctl Yes LCF14-50 is a very good recommendation
-
G4NRT looking forward hearing you as Z21NRT soon
-
DB2OS That sounds pretty good..
-
DB2OS You should announce a time for the user meeting.. e.g. 14:00 local time at the booth. Then all users can meet together..
-
i2NDT Glad to see you soon in Friederichshafen
-
M0EYT Paul good idea I had the same thoughts..
-
I8LYL former I0LYL Lucio I am using the same PA since nearly two weeks now..laying on a metal garden table as a heatsink Temerature is arround 55°C here
-
I will try this over the weekend but I think my computers are too old..
-
ON7NDR Glad Nico that it worked now..