Posts by CT7AGI

Hi,

In your Remote SDR it's possible to connect the Adalm Pluto to Orange PI by ethernet and not by USB?

Thanks in Advance.

73.

Quote from oh2uds

There are many possibilities I guess... With stock firmware;

If you use WIFI, you can configure your router/modem to explode your device to internet (using NAT/PAT). Wifi interface gets the default GW to be the access point (your modem/router)

73's de OH2UDS/TA7W

Baris

Display More

Thank you.
I think the Pluto with stock firmware filters the traffic from different subnets, so you can't foward the pluto port (33431) directly to internet.

You can see the solution here: https://wiki.analog.com/univer…luto/devs/port_forwarding

What I want is to change this filter rules to accept other subnets traffic.

Hi,

It's possible to change Adalm Pluto config to allow a remote connection from a different subnet (via vpn) without a ssh tunnel to another host in the same subnet?

Thanks in Advance.

73,

Jorge Mota
CT7AGI

Quote from DC7KG

Hi,

the AD 9363 data sheet says

Reference clock Input Signal Level 1.3 V p-p AC-coupled external oscillator

That is the typical value, no min or max given.

Detlev

Display More

Hi,

Thank you.

I think there are many people who use the Leo Bodnar mini gpsdo with sucess and that gpsdo don't have the typical value.

I want to remove the original and replace it with an external reference. My problem is if I can use a Pluto with an external reference with specs like DX Patrol gpsdo with sucess and without damage it.

73,

Jorge Mota

Hello,

It's possible to use the DXPatrol GPSDO (10 Mhz 1.5 vpp ~ 7dBm) as an external reference without any attenuation, just correcting the frequency, given that the txco that originally came is 40 Mhz 1.8vpp?
I'm wrong?

Thanks in Advance.

Best Regards.

73,

Jorge Mota
CT7AGI