hello sir
I have rec c/d pluto and ocxo . Can you help me how to insert external clk. My ocxo is 10mhx and 0.005ppm and on pluto bydefault txco is 40mhz
Hello Muhammad,
AD recommends 40 MHz, so you should use an external clock with 40 MHz.
Best regards,
Detlev
Thank you sir.
Hello
Sir it is necessory to use 3db attenuator betweet ocxo and pluto. I dont have attenuator. Any other solution
Hello Muhammed,
the maximum input level of the external clock is 3.3 V pp. I don't know which OCXO you use.
73 Detlev, DC7KG
PS The chinese OSC101 is not usable, see: Where can I buy a TCXO
Its mean i wastes my money because I already ordered this ocxo from aliexpress
This is the link of my ocxo which i orderd
PKR 5,008 10%OFF | OCXO 10MHz Constant temperature crystal oscillator module 20M 30M 80M Frequency reference for Ham Radio Amplifier
https://a.aliexpress.com/_m0qqMoT
SWL-Muhammad Irfan
hello sir
I have rec c/d pluto and ocxo . Can you help me how to insert external clk. My ocxo is 10mhx and 0.005ppm and on pluto bydefault txco is 40mhz
DC7KG
Hello Muhammad,
AD recommends 40 MHz, so you should use an external clock with 40 MHz.
Best regards,
Detlev
SWL-Muhammad Irfan
Thank you sir.
SWL-Muhammad Irfan
Hello
Sir it is necessory to use 3db attenuator betweet ocxo and pluto. I dont have attenuator. Any other solution
DC7KG
Hello Muhammed,
the maximum input level of the external clock is 3.3 V pp. I don't know which OCXO you use.
73 Detlev, DC7KG
PS The chinese OSC101 is not usable, see: Where can I buy a TCXO
SWL-Muhammad Irfan
Its mean i wastes my money because I already ordered this ocxo from aliexpress
This is the link of my ocxo which i orderd
PKR 5,008 10%OFF | OCXO 10MHz Constant temperature crystal oscillator module 20M 30M 80M Frequency reference for Ham Radio Amplifier
https://a.aliexpress.com/_m0qqMoT