Do you have the code for the Arduino Nano for me?
DL1ARS .
I used the code below:
After, I determined only one frequency ( my LO is 1127 MHz) and removed the LCD.
PY1SAN
73 !
Do you have the code for the Arduino Nano for me?
DL1ARS .
I used the code below:
After, I determined only one frequency ( my LO is 1127 MHz) and removed the LCD.
PY1SAN
73 !
Display MoreNice duoband-solution. The RX seems to work very well.
Did you test the Helix feed (of course NOT in direction to 26E ;-)) ) - is there interference of the TX-signal on 2,4 GHZ with the reception of the LNB ? What about the loss in gain because of the helix-feed is "to close" to the dish and not really in the focus ?
Any information and data would be appreciated.
73 de Johannes, DL5RDI
P.s. thanks to Heiner for posting the Youtube-Video !!
Thanks for your comment. Probably i will test TX this week (with dish other direction). I don't have some basics equipments to measurement 2400mhz. However i also believe that i will have an big desense or saturate my LNB.
I will test with 5 watts.
73 !
PY1SAN
GG77 Resende
Rio de Janeiro.