DOWNLOAD > DATV-Easy V2.16

Hi there,

New version V2.16 compatible with LimeSDR mini, PlutoSDR with manufacturer firmware and Pluto with F5OEO firmware.

>> Will be shortly available on the next post.

New compared to version 2.12:

- Added maximum gain coefficient to protect amplifiers from saturation

- Added old settings for outdated NVIDIA card "NVIDIA_old"

- Latest version ffmpeg 01/22/2023 (12.2.0 Rev9)

- Automatic choice of the aac codec type according to the bit rate

- Added Audio SR 22050 and 16000 and auto switch to these values for low bit rate

- Actual minimum bitrate in AAC is now 6kb/s

- Added audio low pass filters depending on SR

- New automatic settings optimization

- On Pluto choice, automatic reboot added when exiting the software

- On Start switch to DATV mode and on Exit switch to passthrough mode (for those who work in voice mode on the Pluto)

- Choice of 5 IP possible on Pluto

>> Now possibility minimum : SR20 on DVB-S2 QPSK 5/6

73 Dominique F1EJP

Hello,

Here is the new version 2.16 which includes all the improvements indicated in the post above.

You can use it with:

- the ADALM PLUTO in USB2 with the original firmware from Analog Device

- The ADALM PLUTO in Ethernet with the Firmware of Evariste F5OEO from 2021 : 0201, 0303, (2103), 2402

- The LimeSDR mini in USB3

You can leave many of the default settings on Automatic or experiment with your settings.

The software also allows you to monitor and control your amplifiers by relay control.

The ZIP Pack includes:

- the installation executable

- the drivers to install (for the Pluto install the 2 exe's)

- links to compatible graphics cards or processor for hardware encoding

- the program for an Arduino Uno with an Ethernet shield card for monitoring the current, voltage, temperature and power.

- a summary of possible remote commands in UDP

- A shortcut to start OBS automatically with the virtual camera

Do not forget to read the PDF notice before any questions.

Thank you for your feedback and encouragement.

Happy testing!

73 Dominique F1EJP

>> remember to uninstall any older version first !

>> Attention for NVIDIA coding You need to update your NVIDIA graphics card drivers

http://www.vivadatv.org/viewto…p?f=84&t=982&p=4037#p4037

Ready for download

73 Dominique F1EJP