DK1MG Hans-Jochen.. ich benutze Version 0.8s bei Bedarf schicke ich dir es..
Posts by DD0KP
-
-
DD4YR Robert schreib mir kurz deine Mail Adresse ann dd0kp@darc.de
-
-
But in addition you need a LO!! It is not included..
-
ok..understood..I thought I have overseen this in my search..
-
PA3FYM Is the red eagle rocket lnb pll based???
-
-
I am running now Wb and NB with one LNB with horizontal polarisation.
Both signals are fine.. sat splitter into Mini-Tiuoner-Express and RTL-sdr..
-
yes.. here as well.. but you can´t configure this on startup in the ini file
-
-
F1FAQ thanks Christian..I also figured out in between..
-
G0MJW Can you tell me how to select LNB port B as default in the ini file of Tioune??
-
You also can get it direct in Germany.. e.g. Pollin or sterndiscount or Ebay..
-
DL4SAC e.g. at BATC with membership also there PCB and special components
-
-
I posted already how you can use ADALM Pluto for DATV using Express DVB Transmitter and MixV.. ofcause with PA and filter behind..
-
this is the filter I am using:
-
I will do my measuments again and then post it as well.. may be there was a change on the BU-500 and there are at least two versions in use.. I also will ask Darco this..
-
Solution fine.. but situation stange... I saw more than 50dbm difference between LO and output signal..
-
DB8TF Flo.. I did measure mine BU-500 on the spectrum analyzer and can´t see this. But put just to be save a filter behind..