Hello
How can I config the HDSDR v2.80 with a SDRPlay RSP2 for OQ-100 operation?
Best 73 de HB9RYZ
Wolfgang
HDSDR v2.80 and SDRPlay RSP2
-
I believe you need to install ExtIO Plugins downloaded from the manufacturer's website.
https://www.sdrplay.com/downloads/
Alternatively you could download HDSDR - v2.76a (13th Jul 2018) always from the same site that installs the HDSDR program and all the necessary components. Afterwards you should be able to update HDSDR with the latest released version. HDSDR V2.80
-
@ Lucio
Hi Lucio
Thank you.
The SDRPlay RSP2 is working with the correct ExtlO Plugin
Normally, I'm also using SDR Radio Console v3.0.22 with my IC-9700 and Omnirig v1.19
The reason why I would like to use HDSDR v2.80 is the support of the new Omnirig v2.1.
I'm using the IC-9700 with the Transverter from PE1CMO. So if I use 431.740 MHz on the IC-9700, it would be 10'489'740 MHZ on QO-100.
I was not able to setup the up/down converter correct.
Best 73 de HB9RYZ
Wolfgang
-
Hello All
I found the soltion with HDSDR v2.8 and my IC-9700 using Omnirig v2.1 for the QO-100 SAT Operation
Setup:
- SDRPlay RSP2 for Downlink 739 MHz (LNB with 25 MHz Ref-In)
- IC-9700 as Transceiver for the Up-Link 431 MHz
- Omnirig v2.10 for HDSDR v2.80 http://www.hb9ryz.ch/omnirig/index.html
- QO-100 Transverter from PE1CMO
You need to install the the ExtIO_SDRplay_RSP2.dll for the SDRPlay RSP2
https://www.sdrplay.com/softwa…HDSDR_Installer_2.76a.exe
HDSDR Offset Configuration in the Omnirig SAT Menu:
- Options - CAT to Radio (Omni-Rig) - set Converter Offset
- Options - RF Front-end Configuration
Omnirig v2.10
http://www.hb9ryz.ch/omnirig/index.html
The whole QO-100 SAT Setup is on my website
http://www.hb9ryz.ch/sat/index.html
Best 73 de HB9RYZ
Wolfgang