First experimental image for Raspberry Pi is now in test phase. Since it is a very early and simple solution, there are still some problems. But regardless i will provide it in the next few days for playing a little bit around and to get some practical experience. Software drift correction works well with SSB, CW, SSTV and PacketRadio on an unmodified PLL LNB. But there is a lot to optimize in the future.
NB Station for Es'hail-2
-
Hi,
could it be that the frequency marker for Mixed should be at 10,489,640 and the marker for SSB at 10489,690? Or are the below frequencys not showing the actual marker?
The rest seems to be correct.
Vy 73
-
Hope all markers are correct
The frequencys below are not the frequencys of the markers -
Dear all,
SDR-Radio is now supporting the ADALM Pluto for full-duplex operation via QO-100.
The intermittent TXing issue has been solved.
Simon is working on a few other issues and plans to release the new public version 3.0.9 tomorrow.
Still the Pluto needs to be modified with respect to its frequency stability but SDR-Radio is now supporting not only the Lime-SDR but also the ADALM-Pluto for QO-100.
Kind regards
Matthias
-
My mini station based on Raspberry Pi for CW, SSB and digimodes:
In the shack:
- Yaesu FT-817ND transmitter with internal TCXO-9- Yaesu SCU-17 soundcard interface for digimodes
- Yaesu CT-62 RS232/CAT cable (Mod for fast PTT detect)
- Kuhne MKU UP 2424 A up converter with internal TCXO
- Logilink AU0048 USB/RS232 cable (Mod for fast PTT switch)
- Raspberry Pi 4B with SAT Controller SDR Nano beta software
- NooElec NESDR Nano3 receiver with 0.5ppm TCXO (2x)
- Official 7" touch display from Raspberry Pi foundation
- Microsoft Bluetooth Mobile Mouse 3600
- CTFWIKE-3 Wireless Bluetooth Keyboard
On the roof:
- Kathrein KEA850 with Octagon OSLO (unmodified) for RX
- Kathrein KEA850 with Winkler helix (2.4GHz, 5-turn) for TX
-
More display size - more fun
-
-
DL3DCW kann you post the link for that display please..
-
Many thanks..
-
Station view from the top
Raspberry Pi 4 on backside of HDMI monitor
Flirc Raspberry Pi 4 case with passive cooling. No fan inside. Zero noise emission ...
-
DL3DCW What do you think about this Monitor type.. I want to buy this.. very nice price..
-
DL3DCW or what do you think of this one?
-
Think they will be work too
-
-
