AMSAT-DL Forum
Recent Activities
-
HB9SKA
Replied to the thread Pluto-Treiber.Post... oder umgekehrt - Anode an Plus, Kathode an Minus. -
HB9SKA
Reacted with to SP3OSJ’s post in the thread Pluto-Treiber.Reaction (Post)Hi
Die LEDs im Diagramm "LNB Versorgung vom USB" sollten vertauscht sein. Andernfalls werden sie kein Licht abgeben.
73
Artur -
SP3OSJ
Posted the thread New TRV for TRX.ThreadHello everyone
I thought to make a new TRV for TRX (HF/VHF).
First, I drew a schematic.
I used dual SAW filters (SF2173E and SF2124E) to accurately get the frequency of 2.4GHz , without any other signal mixing. I used a low-pass filter in the PA. TRV seeded… -
SP3OSJ
Replied to the thread Pluto-Treiber.PostHi
Die LEDs im Diagramm "LNB Versorgung vom USB" sollten vertauscht sein. Andernfalls werden sie kein Licht abgeben.
73
Artur -
HG0NCL
Reacted with to oh2uds’s post in the thread V/U/SHF and QO-100 SDR Transceiver Project.Reaction (Post)Hi All,
After many years we had time have some progress on our SDR Transceiver project mainly for use in QO-100 as a portable setup.
The device idea was very old with using some up/down converters in first prototypes.
When Guido release usdx, it changed the… -
HG0NCL
Reacted with to oh2uds’s post in the thread V/U/SHF and QO-100 SDR Transceiver Project.Reaction (Post) -
DK1RI
Replied to the thread DATVEASY problem.PostTNX Rolf,
When using OBS I selected both Laptop camera and C920 for OBS and they work well in the OBS preview window. And OBS is found at programm start (DATVEasy produce an error if OBS is not running); the error message arise after pressing start.
With… -
PY1SAN
Reacted with to DJ7TH’s post in the thread DATVEASY problem.Reaction (Post)Hi Günter,
If the webcam is visible in the browser window of the PC, you have to select it in OBS in the sources under "Browser" with the corresponding IP:Port
For more infos, here a link to the German translation of the user manual.
Could be it would… -
PY1SAN
Reacted with to DL3ED’s post in the thread Pluto-Treiber.Reaction (Post)moin Zusammen,
habe die Stromversorgung für LNBs fertig und getestet.
Input USB 5V
Output 12V 100mA + Led = In 300mA
Output 18V 100mA + Led = In 490mA
Man kann ohne Probleme einen RTL-Stick Version 5 und die Stromversorgung nebeneinander betreiben. Z.B.… -
DH5RUM
Reacted with to HB9SKA’s post in the thread OSCAR - Status KW 23.Reaction (Post)OSCAR - Status KW 23 im PDF-Format
Rückkopplung / Feedback
Infos und Empfangsberichte sind immer gerne willkommen, auch in diesem Forum als
Antwort.
Information and reception reports are always welcome, also in this forum as
Answer.
Tnx 4 report Robert,…