AMSAT-DL Forum
Recent Activities
-
DL3ED
Replied to the thread Pluto-Treiber.Posthallo Artur,
gute Idee mit den Dioden. Man lert nie aus.
Danke.
73 Ulrich -
HB9DUT
Posted the thread Kuhne MKU UP 2424 with low power IF.ThreadHallo zusammen
hat jemand von euch schon Erfahrungen mit dem Umbau des Kuhne MKU UP 2424 auf low power IF?
Die Idee dahinter ist den Konverter mit der Steuerleistung von 0dBm aus einem Transverterausgang anzusteuern.
Für den MKU 13 G3 hat Kuhne selbst eine… -
DL1AQ / HS0ZQO
Posted the thread Pluto Plus Erfahrungen.ThreadHallo,
ich habe mir den Pluto Plus für den Betrieb über QO-100 zugelegt. Zwei Gründe sprachen für den Pluto Plus: 1. Die Frequenzstabilität und 2. Der Pluto Plus hat schon einen Ethernet-Anschluss. Ein erster (Empfangs)Test lief relativ erfolgreich:… -
SP3OSJ
Replied to the thread Pluto-Treiber.PostIch würde es folgendermaßen machen: -
PY1SAN
Replied to the thread New TRV for TRX.PostVery interesting.
Congratulations.
PY1SAN
GG77
Rio de Janeiro -
PY1SAN
Reacted with to SP3OSJ’s post in the thread New TRV for TRX.Reaction (Post)Hello everyone
I thought to make a new TRV for TRX (HF/VHF).
First, I drew a schematic.
I used dual SAW filters (SF2173E and SF2124E) to accurately get the frequency of 2.4GHz , without any other signal mixing. I used a low-pass filter in the PA. TRV seeded… -
HB9SKA
Replied to the thread Pluto-Treiber.Post... oder umgekehrt - Anode an Plus, Kathode an Minus. -
HB9SKA
Reacted with to SP3OSJ’s post in the thread Pluto-Treiber.Reaction (Post)Hi
Die LEDs im Diagramm "LNB Versorgung vom USB" sollten vertauscht sein. Andernfalls werden sie kein Licht abgeben.
73
Artur -
SP3OSJ
Posted the thread New TRV for TRX.ThreadHello everyone
I thought to make a new TRV for TRX (HF/VHF).
First, I drew a schematic.
I used dual SAW filters (SF2173E and SF2124E) to accurately get the frequency of 2.4GHz , without any other signal mixing. I used a low-pass filter in the PA. TRV seeded… -
SP3OSJ
Replied to the thread Pluto-Treiber.PostHi
Die LEDs im Diagramm "LNB Versorgung vom USB" sollten vertauscht sein. Andernfalls werden sie kein Licht abgeben.
73
Artur