Hi,
there is a digital signal in the mixed mode segment of the NB transponder (10489.650), almost every day, 24h.
Does anybody know what it is and which software can be used for decoding ?
vy 73, Kurt
Hi,
there is a digital signal in the mixed mode segment of the NB transponder (10489.650), almost every day, 24h.
Does anybody know what it is and which software can be used for decoding ?
vy 73, Kurt
KG-STV (digital SSTV) from (mostly) an italian station.. IDY?
Just discussed in the shoutbox a few hours (<24) ago..
Yes KG-STV Application for Windows, usually at 10489.625 +/-.
I confirm. But last week hearded similar signal with more BW, unable to decode.
Regards
Easypal? > https://www.sigidwiki.com/wiki/WinDRM (3 stronger peaks left IN the digital signal visible!) https://www.sigidwiki.com/images/f/f3/Digital_sstvimg.jpg
FreeDV? > https://www.sigidwiki.com/wiki/FreeDV_COHPSK (2 peaks in the middle of the digital Signal visible)
Both modes are used from time to time on QO100 NBTP
Yes, I can confirm KG-SSTV and also EasyPal.
Both digital picture transmissions ...
Center activity on 625.
I´m one of the transmitting (and receiving) stations ....
Any questions?
73s de Robert
Easypal? > https://www.sigidwiki.com/wiki/WinDRM (3 stronger peaks left IN the digital signal visible!) https://www.sigidwiki.com/images/f/f3/Digital_sstvimg.jpg
FreeDV? > https://www.sigidwiki.com/wiki/FreeDV_COHPSK (2 peaks in the middle of the digital Signal visible)
Both modes are used from time to time on QO100 NBTP
Are Tests in Free Dv possible ? Are there any restrictions to use this mode ?
Thanks.
free DV explains the "WB" signal exceed limit of KG-STV band.
Now all is explained !
A.
A few days ago i had a successful QSO with an austrian OM.
The DV signal is much smaller (1,2kHz) than the allowed 2,7kHz, so no problem on NBTP.
If you want to do a test then install the SW and let me know.
vy73 DB8TF
me too.. another mode to present to users, would be willing to participate in rx test (no tx until at least weekend). software is ready.. need a test signal
OK, i send a few minutes a FreeDV signal on 650.
got the last few seconds when settings were correct could you please do another call?
mode 700D?
got you both now, freeDV 1600. what tx are you using (pwr and ant)?
Copied loud and clear
10W into this 24dBi Wifi Grid Dish thingy
ok, so quite comparable with known setups.. thanks for the test!
thanks for information about KG-SSTV,
I can recieve the pictures, using Linux wand wine, works very well.
My first received picture : IZ5ILX / DL9DAC
Currently RX only, hopefully the TX equipment will be ready soon.
vy 73, Kurt
A few days ago i had a successful QSO with an austrian OM.
The DV signal is much smaller (1,2kHz) than the allowed 2,7kHz, so no problem on NBTP.
If you want to do a test then install the SW and let me know.
vy73 DB8TF
Software installed, I will try setup of the audio, trying a combination with sdr console and radio...tu FOR INFO'S.
73 Alex