AMSAT-DL Forum
Recent Activities
-
2E0ILY
Reacted with to oh2uds’s post in the thread V/U/SHF and QO-100 SDR Transceiver Project.Reaction (Post) -
G4IUG
Replied to the thread V/U/SHF and QO-100 SDR Transceiver Project.Post[…]
What language will the presentation be ?
Thanks Dave -
PY1SAN
Reacted with to HB9DUT’s post in the thread Kuhne MKU UP 2424 with low power IF.Reaction (Post)Ich habe eine erste Rückmeldung von Kuhne erhalten:
"...sie können einfach an dem MML Kabel ihr ZF-Signal einspeisen. Das sollte ohne Probleme funktionieren."
Das ist schon mal gut zu wissen. Dennoch habe ich jetzt eine Rückfrage zur Modifikation des… -
HB9DUT
Replied to the thread Kuhne MKU UP 2424 with low power IF.PostIch habe eine erste Rückmeldung von Kuhne erhalten:
"...sie können einfach an dem MML Kabel ihr ZF-Signal einspeisen. Das sollte ohne Probleme funktionieren."
Das ist schon mal gut zu wissen. Dennoch habe ich jetzt eine Rückfrage zur Modifikation des… -
OE3KEU
Reacted with to HB9SKA’s post in the thread OSCAR - Status KW 23.Reaction (Post)OSCAR - Status KW 23 im PDF-Format
Rückkopplung / Feedback
Infos und Empfangsberichte sind immer gerne willkommen, auch in diesem Forum als
Antwort.
Information and reception reports are always welcome, also in this forum as
Answer.
Tnx 4 report Robert,… -
DD4YR
Reacted with to DL3ED’s post in the thread Pluto-Treiber.Reaction (Post)moin,
der einpolige Schalter reicht ja aus wenn die Z-Diode drin ist. Bei 12V kann die (Led 18V) ja nich leuten da die Z-Diode drin ist und der Schalter die (12V Led) gegen Masse schaltet und leuchtet. Schaltet man auf 18V ist die (12V Led) aus und da… -
DK1RI
Replied to the thread DATVEASY problem.PostReading the manual, I understood, that installing VB-audio is optional, but obviously it is mandatory.
After install It is working now, but not with OBS+DroidCam (as given in the manual) or OBS+ virtualCam, only with OBS+VB-Audio-Cable. (???)
... and… -
DL3ED
Replied to the thread Pluto-Treiber.Postmoin,
der einpolige Schalter reicht ja aus wenn die Z-Diode drin ist. Bei 12V kann die (Led 18V) ja nich leuten da die Z-Diode drin ist und der Schalter die (12V Led) gegen Masse schaltet und leuchtet. Schaltet man auf 18V ist die (12V Led) aus und da… -
PY1SAN
Reacted with to DJ7TH’s post in the thread DATVEASY problem.Reaction (Post)Hi Guenter,
DATV Easy does not access the device driver directly, but receives the video and audio data from OBS via virtual cam and possibly the audio data via virtual audio cable, depending on the OBS version.
More details on how to handle the various…