AMSAT-DL Forum
Recent Activities
-
OE3KEU
Reacted with to HB9SKA’s post in the thread OSCAR - Status KW 23.Reaction (Post)OSCAR - Status KW 23 im PDF-Format
Rückkopplung / Feedback
Infos und Empfangsberichte sind immer gerne willkommen, auch in diesem Forum als
Antwort.
Information and reception reports are always welcome, also in this forum as
Answer.
Tnx 4 report Robert,… -
DD4YR
Reacted with to DL3ED’s post in the thread Pluto-Treiber.Reaction (Post)moin,
der einpolige Schalter reicht ja aus wenn die Z-Diode drin ist. Bei 12V kann die (Led 18V) ja nich leuten da die Z-Diode drin ist und der Schalter die (12V Led) gegen Masse schaltet und leuchtet. Schaltet man auf 18V ist die (12V Led) aus und da… -
DK1RI
Replied to the thread DATVEASY problem.PostReading the manual, I understood, that installing VB-audio is optional, but obviously it is mandatory.
After install It is working now, but not with OBS+DroidCam (as given in the manual) or OBS+ virtualCam, only with OBS+VB-Audio-Cable. (???)
... and… -
DL3ED
Replied to the thread Pluto-Treiber.Postmoin,
der einpolige Schalter reicht ja aus wenn die Z-Diode drin ist. Bei 12V kann die (Led 18V) ja nich leuten da die Z-Diode drin ist und der Schalter die (12V Led) gegen Masse schaltet und leuchtet. Schaltet man auf 18V ist die (12V Led) aus und da… -
PY1SAN
Reacted with to DJ7TH’s post in the thread DATVEASY problem.Reaction (Post)Hi Guenter,
DATV Easy does not access the device driver directly, but receives the video and audio data from OBS via virtual cam and possibly the audio data via virtual audio cable, depending on the OBS version.
More details on how to handle the various… -
HB9SKA
Replied to the thread Pluto-Treiber.PostHallo Ulrich
[…]
Dann würde ich einen 2-poligen Umschalter nehmen und die LEDs mit ihren Vorwiderständen über den 2. Pol nach Masse/Minus führen. Beim Umschalten brennt dann die entsprechende LED. -
VE4SW
Reacted with to HB9DUT’s post in the thread Kuhne MKU UP 2424 with low power IF.Reaction (Post)Hallo zusammen
hat jemand von euch schon Erfahrungen mit dem Umbau des Kuhne MKU UP 2424 auf low power IF?
Die Idee dahinter ist den Konverter mit der Steuerleistung von 0dBm aus einem Transverterausgang anzusteuern.
Für den MKU 13 G3 hat Kuhne selbst eine… -
DJ7TH
Replied to the thread DATVEASY problem.PostHi Guenter,
DATV Easy does not access the device driver directly, but receives the video and audio data from OBS via virtual cam and possibly the audio data via virtual audio cable, depending on the OBS version.
More details on how to handle the various… -
DL8EBD
Reacted with to SP3OSJ’s post in the thread New TRV for TRX.Reaction (Post)Hello everyone
I thought to make a new TRV for TRX (HF/VHF).
First, I drew a schematic.
I used dual SAW filters (SF2173E and SF2124E) to accurately get the frequency of 2.4GHz , without any other signal mixing. I used a low-pass filter in the PA. TRV seeded…